Karl Storz IMAGE1 HD H3-Z 22220055 Three-Chip Full HD Camera Head

Apple Shopping Event

Hurry and get discounts up to 20% Read more

Karl Storz IMAGE1 HD H3-Z 22220055 Three-Chip Full HD Camera Head

► Brief Description

The H3-Z (order no. 22220055) is the Full HD three-chip camera head of the KARL STORZ IMAGE1 HD platform. Three 1/3″ CCD sensors deliver 1920 x 1080 progressive images in native 16:9, and the integrated parfocal zoom covers f = 15 – 31 mm at 2x, so the field of view can be changed during a case without losing focus.

The head is fully soakable and steam autoclavable at 134 C, and carries two freely programmable buttons for white balance, enhancement, brightness, shutter, capture or light source toggling. The 300 cm camera cable is non-detachable, as on the original design, and the standard eyepiece adaptor accepts the usual endoscope eyepieces without an extra coupler.

This unit is an original KARL STORZ head in used condition. It has been checked on an IMAGE1 system before packing: image present and stable, no rolling or fixed-pattern lines, zoom and focus smooth, buttons responding, housing and cable gland free of cracks. Photos show the actual unit you will receive, including the model label and the cable connector.

► Features

  • Three-chip Full HD: 3 x 1/3″ CCD at 1920 x 1080, progressive scan, native 16:9 — no conversion needed on WideView monitors.
  • Parfocal 2x zoom: f = 15 – 31 mm, focus holds while the magnification is changed, which saves refocusing on macro shifts.
  • Autoclavable: soakable and steam sterilizable at 134 C, plus EtO and low-temperature plasma.
  • Two programmable buttons: assign white balance, enhancement, brightness, shutter, capture or light toggles directly on the head.
  • Plug-and-play on IMAGE1: works with IMAGE1 HUB HD and IMAGE1 S (TC200 CONNECT with TC300 / TC301 / TC302 LINK modules).
  • Tested before shipping: image, zoom, focus and buttons checked on a bench system, with the result noted on the packing list.
  • Actual photos: the listing images are of this unit, not a catalogue picture — check the label and cable gland before ordering.

► Specification

Product Three-chip Full HD camera head
Model / Order No. H3-Z, 22220055 (-3)
Image sensor 3 x 1/3″ CCD, progressive scan
Resolution 1920 x 1080 (2,073,600 pixels), 16:9 native
Refresh rate 50 Hz / 60 Hz, PAL / NTSC
Zoom Integrated parfocal zoom, 2x, f = 15 – 31 mm
Min. sensitivity F 1.4 / 1.17 Lux
Head controls 2 freely programmable buttons
Coupler Standard eyepiece adaptor
Cable Non-detachable, 300 cm
Dimensions 39 x 49 x 114 mm
Weight 246 g
Reprocessing Soakable, steam autoclavable 134 C, EtO, plasma
Compatibility KARL STORZ IMAGE1 HUB HD / IMAGE1 S
Condition Original used, tested
Quantity 1 piece
MOQ 1 Piece
Package Anti-static bag / foam + export carton
Transportation DHL, FedEx, UPS, etc.
In Stock Yes
Price Accept negotiation

Warranty Policy

All new aftermarket parts come with a 1-Year warranty. Quality is the first thing we consider. Check out our Warranty Assistance for more details.

Shipping Policy

All expedited shipping so you can get your medical machine back in action, fast. Check out our Shipping Policy for more details.

Easy Return Policy

We prioritize your satisfaction. If your order doesn't meet your expectations within 90 days, you may be eligible for a refund. See our Easy Return Policy for details.

Description

Karl Storz IMAGE1 HD H3-Z 22220055 Three-Chip Full HD Camera Head

► Brief Description

The H3-Z (order no. 22220055) is the Full HD three-chip camera head of the KARL STORZ IMAGE1 HD platform. Three 1/3″ CCD sensors deliver 1920 x 1080 progressive images in native 16:9, and the integrated parfocal zoom covers f = 15 – 31 mm at 2x, so the field of view can be changed during a case without losing focus.

The head is fully soakable and steam autoclavable at 134 C, and carries two freely programmable buttons for white balance, enhancement, brightness, shutter, capture or light source toggling. The 300 cm camera cable is non-detachable, as on the original design, and the standard eyepiece adaptor accepts the usual endoscope eyepieces without an extra coupler.

This unit is an original KARL STORZ head in used condition. It has been checked on an IMAGE1 system before packing: image present and stable, no rolling or fixed-pattern lines, zoom and focus smooth, buttons responding, housing and cable gland free of cracks. Photos show the actual unit you will receive, including the model label and the cable connector.

► Features

  • Three-chip Full HD: 3 x 1/3″ CCD at 1920 x 1080, progressive scan, native 16:9 — no conversion needed on WideView monitors.
  • Parfocal 2x zoom: f = 15 – 31 mm, focus holds while the magnification is changed, which saves refocusing on macro shifts.
  • Autoclavable: soakable and steam sterilizable at 134 C, plus EtO and low-temperature plasma.
  • Two programmable buttons: assign white balance, enhancement, brightness, shutter, capture or light toggles directly on the head.
  • Plug-and-play on IMAGE1: works with IMAGE1 HUB HD and IMAGE1 S (TC200 CONNECT with TC300 / TC301 / TC302 LINK modules).
  • Tested before shipping: image, zoom, focus and buttons checked on a bench system, with the result noted on the packing list.
  • Actual photos: the listing images are of this unit, not a catalogue picture — check the label and cable gland before ordering.

Karl Storz IMAGE1 HD H3-Z 22220055 three-chip Full HD camera head with 300 cm camera cable H3-Z camera head and non-detachable camera cable for Karl Storz IMAGE1 HD system Close-up of the Karl Storz H3-Z camera head housing and model label Side view of the Karl Storz H3-Z 22220055 Full HD three-chip camera head Camera cable connector of the Karl Storz H3-Z 22220055 camera head

► Specification

Product Three-chip Full HD camera head
Model / Order No. H3-Z, 22220055 (-3)
Image sensor 3 x 1/3″ CCD, progressive scan
Resolution 1920 x 1080 (2,073,600 pixels), 16:9 native
Refresh rate 50 Hz / 60 Hz, PAL / NTSC
Zoom Integrated parfocal zoom, 2x, f = 15 – 31 mm
Min. sensitivity F 1.4 / 1.17 Lux
Head controls 2 freely programmable buttons
Coupler Standard eyepiece adaptor
Cable Non-detachable, 300 cm
Dimensions 39 x 49 x 114 mm
Weight 246 g
Reprocessing Soakable, steam autoclavable 134 C, EtO, plasma
Compatibility KARL STORZ IMAGE1 HUB HD / IMAGE1 S
Condition Original used, tested
Quantity 1 piece
MOQ 1 Piece
Package Anti-static bag / foam + export carton
Transportation DHL, FedEx, UPS, etc.
In Stock Yes
Price Accept negotiation

► FAQ

Is this camera head new or used?

A: It is an original KARL STORZ unit in used condition, tested on an IMAGE1 system. If you need a brand new head, tell us and we will confirm availability and lead time.

Which control units does it work with?

A: IMAGE1 HUB HD and the IMAGE1 S platform (TC200 CONNECT plus at least one LINK module — TC300 H3-LINK, TC301 X-LINK or TC302 D3-LINK). Tell us your CCU model and we will confirm the pairing.

Can the camera cable be replaced if it fails?

A: The cable is non-detachable on the original design, but it can be replaced during repair. We supply H3-Z camera head cables separately, and we can also repair the head for you.

What is the difference between H3-Z and H3-ZA?

A: The H3-Z is order no. 22220055 with a 15 – 31 mm parfocal zoom; the H3-ZA is the autoclavable variant, order no. 22220061. The two use different cables and repair tools, so confirm the number on your head before ordering.

Do you supply the CCD, lenses and tools for this head?

A: Yes — CCD modules, front lenses, focusing rings and lenses, cables, socket connectors and the H3-Z repair tool set are all available.

► More service

Spare parts for camera system could be provided including: camera head cable, CCD module, front lens, focusing ring, focusing lens, coupler, light guide adaptor, camera head buttons, dust shield, socket connectors and repair tools.

We also repair camera heads and camera control units, and run repair training courses for camera system service.

For more information just contact us.

► About Us

CareUtech is the global provider of medical equipment and medical equipment repair service, as well as offering spare parts. We focus on repair and repair training for monitor, Flexible & Rigid Endoscope, ultrasound, camera system, dynamical system and surgical instrument.

Shipping and packing
All products will be tested and sterilized for free, perfectly packed to ensure the safety of the goods, strictly in accordance with international export rules. We send to worldwide via EMS, DHL, FEDEX or other express, based on your choice.

► What we can do

CareUtech medical equipment repair and spare parts service

Product details

In case you have any questions or concerns, don’t be shy to get in touch with our support team. Our experts will help you select the right type of endoscope accessories, providing you with the best advice possible.

Product details

In case you have any questions or concerns, don’t be shy to get in touch with our support team. Our experts will help you select the right type of endoscope accessories, providing you with the best advice possible.

Description

Karl Storz IMAGE1 HD H3-Z 22220055 Three-Chip Full HD Camera Head

► Brief Description

The H3-Z (order no. 22220055) is the Full HD three-chip camera head of the KARL STORZ IMAGE1 HD platform. Three 1/3″ CCD sensors deliver 1920 x 1080 progressive images in native 16:9, and the integrated parfocal zoom covers f = 15 – 31 mm at 2x, so the field of view can be changed during a case without losing focus.

The head is fully soakable and steam autoclavable at 134 C, and carries two freely programmable buttons for white balance, enhancement, brightness, shutter, capture or light source toggling. The 300 cm camera cable is non-detachable, as on the original design, and the standard eyepiece adaptor accepts the usual endoscope eyepieces without an extra coupler.

This unit is an original KARL STORZ head in used condition. It has been checked on an IMAGE1 system before packing: image present and stable, no rolling or fixed-pattern lines, zoom and focus smooth, buttons responding, housing and cable gland free of cracks. Photos show the actual unit you will receive, including the model label and the cable connector.

► Features

  • Three-chip Full HD: 3 x 1/3″ CCD at 1920 x 1080, progressive scan, native 16:9 — no conversion needed on WideView monitors.
  • Parfocal 2x zoom: f = 15 – 31 mm, focus holds while the magnification is changed, which saves refocusing on macro shifts.
  • Autoclavable: soakable and steam sterilizable at 134 C, plus EtO and low-temperature plasma.
  • Two programmable buttons: assign white balance, enhancement, brightness, shutter, capture or light toggles directly on the head.
  • Plug-and-play on IMAGE1: works with IMAGE1 HUB HD and IMAGE1 S (TC200 CONNECT with TC300 / TC301 / TC302 LINK modules).
  • Tested before shipping: image, zoom, focus and buttons checked on a bench system, with the result noted on the packing list.
  • Actual photos: the listing images are of this unit, not a catalogue picture — check the label and cable gland before ordering.

Karl Storz IMAGE1 HD H3-Z 22220055 three-chip Full HD camera head with 300 cm camera cable H3-Z camera head and non-detachable camera cable for Karl Storz IMAGE1 HD system Close-up of the Karl Storz H3-Z camera head housing and model label Side view of the Karl Storz H3-Z 22220055 Full HD three-chip camera head Camera cable connector of the Karl Storz H3-Z 22220055 camera head

► Specification

Product Three-chip Full HD camera head
Model / Order No. H3-Z, 22220055 (-3)
Image sensor 3 x 1/3″ CCD, progressive scan
Resolution 1920 x 1080 (2,073,600 pixels), 16:9 native
Refresh rate 50 Hz / 60 Hz, PAL / NTSC
Zoom Integrated parfocal zoom, 2x, f = 15 – 31 mm
Min. sensitivity F 1.4 / 1.17 Lux
Head controls 2 freely programmable buttons
Coupler Standard eyepiece adaptor
Cable Non-detachable, 300 cm
Dimensions 39 x 49 x 114 mm
Weight 246 g
Reprocessing Soakable, steam autoclavable 134 C, EtO, plasma
Compatibility KARL STORZ IMAGE1 HUB HD / IMAGE1 S
Condition Original used, tested
Quantity 1 piece
MOQ 1 Piece
Package Anti-static bag / foam + export carton
Transportation DHL, FedEx, UPS, etc.
In Stock Yes
Price Accept negotiation

► FAQ

Is this camera head new or used?

A: It is an original KARL STORZ unit in used condition, tested on an IMAGE1 system. If you need a brand new head, tell us and we will confirm availability and lead time.

Which control units does it work with?

A: IMAGE1 HUB HD and the IMAGE1 S platform (TC200 CONNECT plus at least one LINK module — TC300 H3-LINK, TC301 X-LINK or TC302 D3-LINK). Tell us your CCU model and we will confirm the pairing.

Can the camera cable be replaced if it fails?

A: The cable is non-detachable on the original design, but it can be replaced during repair. We supply H3-Z camera head cables separately, and we can also repair the head for you.

What is the difference between H3-Z and H3-ZA?

A: The H3-Z is order no. 22220055 with a 15 – 31 mm parfocal zoom; the H3-ZA is the autoclavable variant, order no. 22220061. The two use different cables and repair tools, so confirm the number on your head before ordering.

Do you supply the CCD, lenses and tools for this head?

A: Yes — CCD modules, front lenses, focusing rings and lenses, cables, socket connectors and the H3-Z repair tool set are all available.

► More service

Spare parts for camera system could be provided including: camera head cable, CCD module, front lens, focusing ring, focusing lens, coupler, light guide adaptor, camera head buttons, dust shield, socket connectors and repair tools.

We also repair camera heads and camera control units, and run repair training courses for camera system service.

For more information just contact us.

► About Us

CareUtech is the global provider of medical equipment and medical equipment repair service, as well as offering spare parts. We focus on repair and repair training for monitor, Flexible & Rigid Endoscope, ultrasound, camera system, dynamical system and surgical instrument.

Shipping and packing
All products will be tested and sterilized for free, perfectly packed to ensure the safety of the goods, strictly in accordance with international export rules. We send to worldwide via EMS, DHL, FEDEX or other express, based on your choice.

► What we can do

CareUtech medical equipment repair and spare parts service

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Karl Storz IMAGE1 HD H3-Z 22220055 Three-Chip Full HD Camera Head”

Your email address will not be published. Required fields are marked *

Fix Once Right, Save Replacement Costs

Flexible endoscopes are among the most advanced and most used devices in the healthcare environment. As their use continues to expand, they are a critical component in improving patient surgical outcomes.

However, without the right quality assurance services, they can also present infection risks to customers, leading to significant avoidable service costs over the life of the device.

Long-term replacement or good accessory maintenance is necessary to extend the life of your endoscope equipment, and CareU Tech is committed to reducing service costs and minimizing patient risk so that repaired endoscopes always meet optimal performance standards.

If you have any needs for flexible endoscope accessories, such as insertion tubes, light guides, biopsy channels, air/water channels, flexures and assemblies, flex rubbers and meshes, etc., please contact our sales team and we will be here to meet your needs!