Drager M7.3 plus Electrical Energy Unit PSU 10073201.14 For Evita V300 / V500 Ventilator

Apple Shopping Event

Hurry and get discounts up to 20% Read more

Drager M7.3 plus Electrical Energy Unit PSU 10073201.14 For Evita V300 / V500 Ventilator

► Brief Description

The M7.3 plus is the electrical energy unit — the mains power supply module — used in the DRÄGER Evita V300 and Evita V500 intensive care ventilators. Built for Dräger by Benning, it converts 100–240 V AC mains into the 25 V DC rail that feeds the ventilator electronics and, in parallel, charges the two internal batteries through separate charging outputs.

A failing energy unit shows itself quickly: the ventilator will not start on mains power, drops to battery although the mains lead is connected, raises supply or charging alarms, or aborts the self-test. As the module is a self-contained slide-in unit, replacing it is a mechanical operation rather than a board-level repair — which makes the M7.3 plus one of the most cost-effective spare parts for an Evita fleet.

► Features

  • Universal mains input: 100–240 V AC, 50/60 Hz, 3.1–3 A — the same unit can be used in any country without voltage selection.
  • 200 W DC output: 25 V DC total DC output, rated 200 W with passive cooling at 30 °C ambient (25.0 V / active cooling at 25 °C).
  • Two independent battery chargers: separate battery 1 and battery 2 outputs keep both internal batteries conditioned and report their status to the ventilator.
  • Auxiliary fan rail: dedicated 12–24 V / 200 mA output for the cooling fan.
  • Direct replacement: IEC AC inlet on the front and X20 DC output connector — no rewiring, no adapter harness.
  • Original Dräger part: P/N 10073201.14 (reference 8421200-07), supplied with the mounting rail and fixing screws of the original design.
  • Load tested: each unit is run on a test load and its output voltages checked before packing.

► Specification

Brand Dräger (PSU manufactured by Benning)
Model M7.3 plus
Part No. 10073201.14
Reference 8421200-07
Series Electrical Energy Unit (power supply)
Condition Original Dräger unit, tested
Input 100–240 V AC, 50/60 Hz, 3.1–3 A
Output 25 V DC, 200 W total DC output
Battery outputs Battery 1 / Battery 2 charging outputs
Auxiliary output 12–24 V, 200 mA (fan)
Cooling Passive (30 °C) / active (25 °C)
Connectors IEC AC inlet, X20 DC output
Application Dräger Evita V300 / Evita V500 ventilator
Country of origin Germany
MOQ 1 Piece
Package Carton / Standard export packing
Transportation DHL, FedEx, UPS, etc.
In Stock Yes
Price Accept negotiation

Warranty Policy

All new aftermarket parts come with a 1-Year warranty. Quality is the first thing we consider. Check out our Warranty Assistance for more details.

Shipping Policy

All expedited shipping so you can get your medical machine back in action, fast. Check out our Shipping Policy for more details.

Easy Return Policy

We prioritize your satisfaction. If your order doesn't meet your expectations within 90 days, you may be eligible for a refund. See our Easy Return Policy for details.

Description

Drager M7.3 plus Electrical Energy Unit PSU 10073201.14 For Evita V300 / V500 Ventilator

► Brief Description

The M7.3 plus is the electrical energy unit — the mains power supply module — used in the DRÄGER Evita V300 and Evita V500 intensive care ventilators. Built for Dräger by Benning, it converts 100–240 V AC mains into the 25 V DC rail that feeds the ventilator electronics and, in parallel, charges the two internal batteries through separate charging outputs.

A failing energy unit shows itself quickly: the ventilator will not start on mains power, drops to battery although the mains lead is connected, raises supply or charging alarms, or aborts the self-test. As the module is a self-contained slide-in unit, replacing it is a mechanical operation rather than a board-level repair — which makes the M7.3 plus one of the most cost-effective spare parts for an Evita fleet.

► Features

  • Universal mains input: 100–240 V AC, 50/60 Hz, 3.1–3 A — the same unit can be used in any country without voltage selection.
  • 200 W DC output: 25 V DC total DC output, rated 200 W with passive cooling at 30 °C ambient (25.0 V / active cooling at 25 °C).
  • Two independent battery chargers: separate battery 1 and battery 2 outputs keep both internal batteries conditioned and report their status to the ventilator.
  • Auxiliary fan rail: dedicated 12–24 V / 200 mA output for the cooling fan.
  • Direct replacement: IEC AC inlet on the front and X20 DC output connector — no rewiring, no adapter harness.
  • Original Dräger part: P/N 10073201.14 (reference 8421200-07), supplied with the mounting rail and fixing screws of the original design.
  • Load tested: each unit is run on a test load and its output voltages checked before packing.

► Specification

Drager M7.3 plus electrical energy unit power supply for Evita V300 V500 ventilator Drager M7.3 plus power supply nameplate part number 10073201.14 X20 output connector of Drager M7.3 plus power supply unit IEC AC inlet of Drager M7.3 plus power supply unit

Brand Dräger (PSU manufactured by Benning)
Model M7.3 plus
Part No. 10073201.14
Reference 8421200-07
Series Electrical Energy Unit (power supply)
Condition Original Dräger unit, tested
Input 100–240 V AC, 50/60 Hz, 3.1–3 A
Output 25 V DC, 200 W total DC output
Battery outputs Battery 1 / Battery 2 charging outputs
Auxiliary output 12–24 V, 200 mA (fan)
Cooling Passive (30 °C) / active (25 °C)
Connectors IEC AC inlet, X20 DC output
Application Dräger Evita V300 / Evita V500 ventilator
Country of origin Germany
MOQ 1 Piece
Package Carton / Standard export packing
Transportation DHL, FedEx, UPS, etc.
In Stock Yes
Price Accept negotiation

► FAQ

What are the symptoms of a failed M7.3 plus energy unit?

A: A ventilator that does not power up from mains, repeated switching to battery with the mains lead connected, “power supply” or battery-charging alarms, flickering indicators, or a self-test that stops at the supply check.

Is the M7.3 plus the same thing as the PS500 power supply?

A: The M7.3 plus is the energy unit fitted inside the Dräger PS500 power-supply assembly; PS500 is the complete chassis including the gas supply options. This listing covers the energy unit only — please compare the part number on your unit (10073201.14 / 8421200-07) before ordering.

Can the module be replaced on site?

A: Mechanically yes — it slides out after the retaining screws are released and connects through the AC inlet and the X20 output. Because the ventilator must pass a safety and performance check afterwards, Dräger recommends service-trained personnel for the replacement.

Do you also supply other Evita V300 / V500 spare parts?

A: Yes. We stock flow sensors, valves, boards, displays and power supply parts for the Evita V300 / V500 series; send us the part number and we will quote.

► More service

Spare parts for Olympus and Karl Storz camera systems and processors, such as CCD, camera cable, front panel, socket, main board, cover, sheath / strain relief and keypad.
Camera system brands: OLYMPUS, WOLF, STORZ, Stryker, Smith & Nephew, ScanMed, etc.

Main models of camera head:
5502, 5506, 5507, 5509, 5512, 5516, 5525, 5550, etc by Wolf;
OTV-S4, OTV-S5, OTV-SX2, OTV-SC, OTV-S6, OTV-S7, CV-165, etc by Olympus;
22201020, 20242020, 22202022, 20212020, etc by Storz Image 1 HUB HD;
888i, 988i, 1088/1088HD, 1188/1188HD, 1288/1288HD, 1488/1488HD, 1588/1588HD, 1688/1688HD, etc by Stryker;
460P, 560P, ED-3, 325Z, 350, etc by Smith & Nephew.

► About Us

CareUtech is the global provider of medical equipment and medical equipment repair service, as well as offering spare parts. We focus on repair and repair training for monitor, Flexible & Rigid Endoscope, ultrasound, camera system, dynamical system and surgical instrument.

Shipping and packing
All products will be tested and sterilized for free, perfectly packed to ensure the safety of the goods, strictly in accordance with international export rules. We send to worldwide via EMS, DHL, FEDEX or other express, based on your choice.

► What we can do

CareUtech medical equipment repair and spare parts service

Product details

In case you have any questions or concerns, don’t be shy to get in touch with our support team. Our experts will help you select the right type of endoscope accessories, providing you with the best advice possible.

Product details

In case you have any questions or concerns, don’t be shy to get in touch with our support team. Our experts will help you select the right type of endoscope accessories, providing you with the best advice possible.

Description

Drager M7.3 plus Electrical Energy Unit PSU 10073201.14 For Evita V300 / V500 Ventilator

► Brief Description

The M7.3 plus is the electrical energy unit — the mains power supply module — used in the DRÄGER Evita V300 and Evita V500 intensive care ventilators. Built for Dräger by Benning, it converts 100–240 V AC mains into the 25 V DC rail that feeds the ventilator electronics and, in parallel, charges the two internal batteries through separate charging outputs.

A failing energy unit shows itself quickly: the ventilator will not start on mains power, drops to battery although the mains lead is connected, raises supply or charging alarms, or aborts the self-test. As the module is a self-contained slide-in unit, replacing it is a mechanical operation rather than a board-level repair — which makes the M7.3 plus one of the most cost-effective spare parts for an Evita fleet.

► Features

  • Universal mains input: 100–240 V AC, 50/60 Hz, 3.1–3 A — the same unit can be used in any country without voltage selection.
  • 200 W DC output: 25 V DC total DC output, rated 200 W with passive cooling at 30 °C ambient (25.0 V / active cooling at 25 °C).
  • Two independent battery chargers: separate battery 1 and battery 2 outputs keep both internal batteries conditioned and report their status to the ventilator.
  • Auxiliary fan rail: dedicated 12–24 V / 200 mA output for the cooling fan.
  • Direct replacement: IEC AC inlet on the front and X20 DC output connector — no rewiring, no adapter harness.
  • Original Dräger part: P/N 10073201.14 (reference 8421200-07), supplied with the mounting rail and fixing screws of the original design.
  • Load tested: each unit is run on a test load and its output voltages checked before packing.

► Specification

Drager M7.3 plus electrical energy unit power supply for Evita V300 V500 ventilator Drager M7.3 plus power supply nameplate part number 10073201.14 X20 output connector of Drager M7.3 plus power supply unit IEC AC inlet of Drager M7.3 plus power supply unit

Brand Dräger (PSU manufactured by Benning)
Model M7.3 plus
Part No. 10073201.14
Reference 8421200-07
Series Electrical Energy Unit (power supply)
Condition Original Dräger unit, tested
Input 100–240 V AC, 50/60 Hz, 3.1–3 A
Output 25 V DC, 200 W total DC output
Battery outputs Battery 1 / Battery 2 charging outputs
Auxiliary output 12–24 V, 200 mA (fan)
Cooling Passive (30 °C) / active (25 °C)
Connectors IEC AC inlet, X20 DC output
Application Dräger Evita V300 / Evita V500 ventilator
Country of origin Germany
MOQ 1 Piece
Package Carton / Standard export packing
Transportation DHL, FedEx, UPS, etc.
In Stock Yes
Price Accept negotiation

► FAQ

What are the symptoms of a failed M7.3 plus energy unit?

A: A ventilator that does not power up from mains, repeated switching to battery with the mains lead connected, “power supply” or battery-charging alarms, flickering indicators, or a self-test that stops at the supply check.

Is the M7.3 plus the same thing as the PS500 power supply?

A: The M7.3 plus is the energy unit fitted inside the Dräger PS500 power-supply assembly; PS500 is the complete chassis including the gas supply options. This listing covers the energy unit only — please compare the part number on your unit (10073201.14 / 8421200-07) before ordering.

Can the module be replaced on site?

A: Mechanically yes — it slides out after the retaining screws are released and connects through the AC inlet and the X20 output. Because the ventilator must pass a safety and performance check afterwards, Dräger recommends service-trained personnel for the replacement.

Do you also supply other Evita V300 / V500 spare parts?

A: Yes. We stock flow sensors, valves, boards, displays and power supply parts for the Evita V300 / V500 series; send us the part number and we will quote.

► More service

Spare parts for Olympus and Karl Storz camera systems and processors, such as CCD, camera cable, front panel, socket, main board, cover, sheath / strain relief and keypad.
Camera system brands: OLYMPUS, WOLF, STORZ, Stryker, Smith & Nephew, ScanMed, etc.

Main models of camera head:
5502, 5506, 5507, 5509, 5512, 5516, 5525, 5550, etc by Wolf;
OTV-S4, OTV-S5, OTV-SX2, OTV-SC, OTV-S6, OTV-S7, CV-165, etc by Olympus;
22201020, 20242020, 22202022, 20212020, etc by Storz Image 1 HUB HD;
888i, 988i, 1088/1088HD, 1188/1188HD, 1288/1288HD, 1488/1488HD, 1588/1588HD, 1688/1688HD, etc by Stryker;
460P, 560P, ED-3, 325Z, 350, etc by Smith & Nephew.

► About Us

CareUtech is the global provider of medical equipment and medical equipment repair service, as well as offering spare parts. We focus on repair and repair training for monitor, Flexible & Rigid Endoscope, ultrasound, camera system, dynamical system and surgical instrument.

Shipping and packing
All products will be tested and sterilized for free, perfectly packed to ensure the safety of the goods, strictly in accordance with international export rules. We send to worldwide via EMS, DHL, FEDEX or other express, based on your choice.

► What we can do

CareUtech medical equipment repair and spare parts service

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Drager M7.3 plus Electrical Energy Unit PSU 10073201.14 For Evita V300 / V500 Ventilator”

Your email address will not be published. Required fields are marked *

Fix Once Right, Save Replacement Costs

Flexible endoscopes are among the most advanced and most used devices in the healthcare environment. As their use continues to expand, they are a critical component in improving patient surgical outcomes.

However, without the right quality assurance services, they can also present infection risks to customers, leading to significant avoidable service costs over the life of the device.

Long-term replacement or good accessory maintenance is necessary to extend the life of your endoscope equipment, and CareU Tech is committed to reducing service costs and minimizing patient risk so that repaired endoscopes always meet optimal performance standards.

If you have any needs for flexible endoscope accessories, such as insertion tubes, light guides, biopsy channels, air/water channels, flexures and assemblies, flex rubbers and meshes, etc., please contact our sales team and we will be here to meet your needs!