Olympus CLV-190 Light Source Front Panel Faceplate Assembly For EVIS EXERA III

Apple Shopping Event

Hurry and get discounts up to 20% Read more

Olympus CLV-190 Light Source Front Panel Faceplate Assembly For EVIS EXERA III

► Brief Description

The front panel of the OLYMPUS CLV-190 xenon light source (EVIS EXERA III) is more than a cosmetic faceplate. It carries the printed membrane keypad, the status LEDs and the control PCB that turn every button press into a command for the lamp, the brightness control and the observation filter unit: LAMP, BRIGHTNESS +/-, AUTO / MANUAL, NBI, AFI, IR and STBY all run through this single assembly.

In the field these panels fail in three ways — the printed membrane wears through at the most-used buttons and the switch no longer closes, disinfectant seeps behind the faceplate and corrodes the tracks, or the connector is damaged while the unit is being moved. In every case the light source becomes unusable even though the lamp, ballast and optics are still perfectly serviceable. Replacing the panel assembly restores full control at a fraction of the cost of a light source.

► Features

  • One complete assembly: printed faceplate, membrane keypad, indicator LEDs and control PCB supplied together, so there is no need to transfer switches from the old panel.
  • Full button set restored: LAMP, BRIGHTNESS +/-, AUTO / MANUAL, NBI, AFI, IR and STBY, with the brightness bar and filter indicator LEDs.
  • Exact mechanical fit: mounting bosses, screw holes and the light-guide port cut-out match the CLV-190 chassis; the panel seats without filing or trimming.
  • Disinfectant-resistant print: hard-coated legend stands up to the alcohol and aldehyde wipes used between cases, so the symbols do not rub off.
  • Plug-in connection: ribbon cable and connector are included; no soldering and no calibration after fitting.
  • Button-by-button tested: each panel is checked on a CLV-190 before packing — every key, every LED.

► Specification

Brand Olympus
Model CLV-190
Series Front Panel / Faceplate Assembly
Condition Brand new
Compatible system EVIS EXERA III light source CLV-190
Buttons LAMP, BRIGHTNESS +/- , AUTO/MANUAL, NBI, AFI, IR, STBY
Indicators Power, lamp, filter and brightness bar LEDs
Material ABS faceplate with polycarbonate membrane
Included Faceplate, membrane keypad, control PCB, ribbon cable
Colour White faceplate / black keypad area
MOQ 1 Piece
Package Carton / Standard export packing
Transportation DHL, FedEx, UPS, etc.
In Stock Yes
Price Accept negotiation

Warranty Policy

All new aftermarket parts come with a 1-Year warranty. Quality is the first thing we consider. Check out our Warranty Assistance for more details.

Shipping Policy

All expedited shipping so you can get your medical machine back in action, fast. Check out our Shipping Policy for more details.

Easy Return Policy

We prioritize your satisfaction. If your order doesn't meet your expectations within 90 days, you may be eligible for a refund. See our Easy Return Policy for details.

Description

Olympus CLV-190 Light Source Front Panel Faceplate Assembly For EVIS EXERA III

► Brief Description

The front panel of the OLYMPUS CLV-190 xenon light source (EVIS EXERA III) is more than a cosmetic faceplate. It carries the printed membrane keypad, the status LEDs and the control PCB that turn every button press into a command for the lamp, the brightness control and the observation filter unit: LAMP, BRIGHTNESS +/-, AUTO / MANUAL, NBI, AFI, IR and STBY all run through this single assembly.

In the field these panels fail in three ways — the printed membrane wears through at the most-used buttons and the switch no longer closes, disinfectant seeps behind the faceplate and corrodes the tracks, or the connector is damaged while the unit is being moved. In every case the light source becomes unusable even though the lamp, ballast and optics are still perfectly serviceable. Replacing the panel assembly restores full control at a fraction of the cost of a light source.

► Features

  • One complete assembly: printed faceplate, membrane keypad, indicator LEDs and control PCB supplied together, so there is no need to transfer switches from the old panel.
  • Full button set restored: LAMP, BRIGHTNESS +/-, AUTO / MANUAL, NBI, AFI, IR and STBY, with the brightness bar and filter indicator LEDs.
  • Exact mechanical fit: mounting bosses, screw holes and the light-guide port cut-out match the CLV-190 chassis; the panel seats without filing or trimming.
  • Disinfectant-resistant print: hard-coated legend stands up to the alcohol and aldehyde wipes used between cases, so the symbols do not rub off.
  • Plug-in connection: ribbon cable and connector are included; no soldering and no calibration after fitting.
  • Button-by-button tested: each panel is checked on a CLV-190 before packing — every key, every LED.

► Specification

Olympus CLV-190 light source front panel faceplate for EVIS EXERA III Rear control PCB of Olympus CLV-190 front panel assembly Side view of Olympus CLV-190 light source front panel Mounting side of Olympus CLV-190 front panel faceplate

Brand Olympus
Model CLV-190
Series Front Panel / Faceplate Assembly
Condition Brand new
Compatible system EVIS EXERA III light source CLV-190
Buttons LAMP, BRIGHTNESS +/- , AUTO/MANUAL, NBI, AFI, IR, STBY
Indicators Power, lamp, filter and brightness bar LEDs
Material ABS faceplate with polycarbonate membrane
Included Faceplate, membrane keypad, control PCB, ribbon cable
Colour White faceplate / black keypad area
MOQ 1 Piece
Package Carton / Standard export packing
Transportation DHL, FedEx, UPS, etc.
In Stock Yes
Price Accept negotiation

► FAQ

How can I tell whether the front panel or the main board is faulty?

A: If the light source still ignites and can be controlled from the remote, but the buttons on the panel feel dead or only work when pressed hard, the membrane or its PCB is the usual culprit. If the panel LEDs do not light at all, check the ribbon connector first — a loose connector produces the same symptom as a failed panel.

Is the legend already printed on the new panel?

A: Yes. The faceplate is supplied silk-screen printed with the complete CLV-190 legend and the membrane switches are laminated to it, so the panel looks and works exactly like the original.

Will this panel fit a CV-190 video processor?

A: No. This assembly is for the CLV-190 light source only. The CV-190 processor uses a different front panel; we can supply that one separately.

Is any software set-up required after replacement?

A: No. The panel is a hardware assembly; once connected the light source recognises it and all functions are available immediately.

► More service

Spare parts for Olympus and Karl Storz camera systems and processors, such as CCD, camera cable, front panel, socket, main board, cover, sheath / strain relief and keypad.
Camera system brands: OLYMPUS, WOLF, STORZ, Stryker, Smith & Nephew, ScanMed, etc.

Main models of camera head:
5502, 5506, 5507, 5509, 5512, 5516, 5525, 5550, etc by Wolf;
OTV-S4, OTV-S5, OTV-SX2, OTV-SC, OTV-S6, OTV-S7, CV-165, etc by Olympus;
22201020, 20242020, 22202022, 20212020, etc by Storz Image 1 HUB HD;
888i, 988i, 1088/1088HD, 1188/1188HD, 1288/1288HD, 1488/1488HD, 1588/1588HD, 1688/1688HD, etc by Stryker;
460P, 560P, ED-3, 325Z, 350, etc by Smith & Nephew.

► About Us

CareUtech is the global provider of medical equipment and medical equipment repair service, as well as offering spare parts. We focus on repair and repair training for monitor, Flexible & Rigid Endoscope, ultrasound, camera system, dynamical system and surgical instrument.

Shipping and packing
All products will be tested and sterilized for free, perfectly packed to ensure the safety of the goods, strictly in accordance with international export rules. We send to worldwide via EMS, DHL, FEDEX or other express, based on your choice.

► What we can do

CareUtech medical equipment repair and spare parts service

Product details

In case you have any questions or concerns, don’t be shy to get in touch with our support team. Our experts will help you select the right type of endoscope accessories, providing you with the best advice possible.

Product details

In case you have any questions or concerns, don’t be shy to get in touch with our support team. Our experts will help you select the right type of endoscope accessories, providing you with the best advice possible.

Description

Olympus CLV-190 Light Source Front Panel Faceplate Assembly For EVIS EXERA III

► Brief Description

The front panel of the OLYMPUS CLV-190 xenon light source (EVIS EXERA III) is more than a cosmetic faceplate. It carries the printed membrane keypad, the status LEDs and the control PCB that turn every button press into a command for the lamp, the brightness control and the observation filter unit: LAMP, BRIGHTNESS +/-, AUTO / MANUAL, NBI, AFI, IR and STBY all run through this single assembly.

In the field these panels fail in three ways — the printed membrane wears through at the most-used buttons and the switch no longer closes, disinfectant seeps behind the faceplate and corrodes the tracks, or the connector is damaged while the unit is being moved. In every case the light source becomes unusable even though the lamp, ballast and optics are still perfectly serviceable. Replacing the panel assembly restores full control at a fraction of the cost of a light source.

► Features

  • One complete assembly: printed faceplate, membrane keypad, indicator LEDs and control PCB supplied together, so there is no need to transfer switches from the old panel.
  • Full button set restored: LAMP, BRIGHTNESS +/-, AUTO / MANUAL, NBI, AFI, IR and STBY, with the brightness bar and filter indicator LEDs.
  • Exact mechanical fit: mounting bosses, screw holes and the light-guide port cut-out match the CLV-190 chassis; the panel seats without filing or trimming.
  • Disinfectant-resistant print: hard-coated legend stands up to the alcohol and aldehyde wipes used between cases, so the symbols do not rub off.
  • Plug-in connection: ribbon cable and connector are included; no soldering and no calibration after fitting.
  • Button-by-button tested: each panel is checked on a CLV-190 before packing — every key, every LED.

► Specification

Olympus CLV-190 light source front panel faceplate for EVIS EXERA III Rear control PCB of Olympus CLV-190 front panel assembly Side view of Olympus CLV-190 light source front panel Mounting side of Olympus CLV-190 front panel faceplate

Brand Olympus
Model CLV-190
Series Front Panel / Faceplate Assembly
Condition Brand new
Compatible system EVIS EXERA III light source CLV-190
Buttons LAMP, BRIGHTNESS +/- , AUTO/MANUAL, NBI, AFI, IR, STBY
Indicators Power, lamp, filter and brightness bar LEDs
Material ABS faceplate with polycarbonate membrane
Included Faceplate, membrane keypad, control PCB, ribbon cable
Colour White faceplate / black keypad area
MOQ 1 Piece
Package Carton / Standard export packing
Transportation DHL, FedEx, UPS, etc.
In Stock Yes
Price Accept negotiation

► FAQ

How can I tell whether the front panel or the main board is faulty?

A: If the light source still ignites and can be controlled from the remote, but the buttons on the panel feel dead or only work when pressed hard, the membrane or its PCB is the usual culprit. If the panel LEDs do not light at all, check the ribbon connector first — a loose connector produces the same symptom as a failed panel.

Is the legend already printed on the new panel?

A: Yes. The faceplate is supplied silk-screen printed with the complete CLV-190 legend and the membrane switches are laminated to it, so the panel looks and works exactly like the original.

Will this panel fit a CV-190 video processor?

A: No. This assembly is for the CLV-190 light source only. The CV-190 processor uses a different front panel; we can supply that one separately.

Is any software set-up required after replacement?

A: No. The panel is a hardware assembly; once connected the light source recognises it and all functions are available immediately.

► More service

Spare parts for Olympus and Karl Storz camera systems and processors, such as CCD, camera cable, front panel, socket, main board, cover, sheath / strain relief and keypad.
Camera system brands: OLYMPUS, WOLF, STORZ, Stryker, Smith & Nephew, ScanMed, etc.

Main models of camera head:
5502, 5506, 5507, 5509, 5512, 5516, 5525, 5550, etc by Wolf;
OTV-S4, OTV-S5, OTV-SX2, OTV-SC, OTV-S6, OTV-S7, CV-165, etc by Olympus;
22201020, 20242020, 22202022, 20212020, etc by Storz Image 1 HUB HD;
888i, 988i, 1088/1088HD, 1188/1188HD, 1288/1288HD, 1488/1488HD, 1588/1588HD, 1688/1688HD, etc by Stryker;
460P, 560P, ED-3, 325Z, 350, etc by Smith & Nephew.

► About Us

CareUtech is the global provider of medical equipment and medical equipment repair service, as well as offering spare parts. We focus on repair and repair training for monitor, Flexible & Rigid Endoscope, ultrasound, camera system, dynamical system and surgical instrument.

Shipping and packing
All products will be tested and sterilized for free, perfectly packed to ensure the safety of the goods, strictly in accordance with international export rules. We send to worldwide via EMS, DHL, FEDEX or other express, based on your choice.

► What we can do

CareUtech medical equipment repair and spare parts service

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Olympus CLV-190 Light Source Front Panel Faceplate Assembly For EVIS EXERA III”

Your email address will not be published. Required fields are marked *

Fix Once Right, Save Replacement Costs

Flexible endoscopes are among the most advanced and most used devices in the healthcare environment. As their use continues to expand, they are a critical component in improving patient surgical outcomes.

However, without the right quality assurance services, they can also present infection risks to customers, leading to significant avoidable service costs over the life of the device.

Long-term replacement or good accessory maintenance is necessary to extend the life of your endoscope equipment, and CareU Tech is committed to reducing service costs and minimizing patient risk so that repaired endoscopes always meet optimal performance standards.

If you have any needs for flexible endoscope accessories, such as insertion tubes, light guides, biopsy channels, air/water channels, flexures and assemblies, flex rubbers and meshes, etc., please contact our sales team and we will be here to meet your needs!